Vipeak straight centrifugal grinding mill's seven unique advantages
1 Consumption saving
The amount of energy consumption which the straight centrifugal grinder's blower consumes is only 6% of mill, but Raymond pulverizer is 81%. In addition, the consumed energy when the spiller slides the stone occupies 25% of the whole energy, but straight centrifugal grinder does not exist.
2 High efficiency
In same condition, the grinding roller of straight centrifugal grinder can be through an area 2.3 times larger than Raymond Pulverizer.
3 High using rate
Grinding roller and grinding ring of Raymond Pulverizer are sunken in middle parts, so the metal amount that discarded is only 35% of original weight, but materiel in straight centrifugal grinder fall from top to bottom, so the metal amount can reach high to 55%.
4 Accident insurance
If bolt or iron ore falls into the Raymond Pulverize, this will conduce to breaking shovel and roller suspender transmutation. But straight centrifugal grinder will not appear such condition.
5 Well using against high hardness and hard-process material
As for some high-rigidity material, such as carborundum, corundum, zirconium, the output will fall down because the grinding roller and grinding ring of Raymond Pulverize are sunken in middle parts. But in straight centrifugal grinder, it skives material up and down equably, so the output shows much more stabilization.
6 Wet production
Water is allowed using in straight centrifugal grinder.
7 Occupation of area is small
It does not need to allocate whirlwind separator and a lot of pipelines etc., so the occupation of land space is small.