Hydraulic cone crushing station should be installed in the place where suit to facilitate the operation.Locking hydraulic cylinders and hydraulic cylinder should be connected with their corresponding oil-ways, in order to ensure the hydraulic cylinders push forward and backward simultaneously. When hydraulic parts installed, operator should take a pressure tested, and the test pressure should be 14MPa. In the process of testing, residual gas should be discharged from the hydraulic piping and locking cylinder through the pipe and screw plug at the bottom of the accumulator.
Before the locking hydraulic cylinder pressure testing, the accumulator must be filled with 7.5-8MPa nitrogen. Please ensure the hydraulic system pressure relief before filling nitrogen,and when promote the hydraulic cylinder pressure test, you should make the lock cylinder pressure relief. Ensure all components no seepage ,no leak, flexible and reliable instrument in pressure test.
After pressure testing, then process the adjusting device test to insure flexible operation and hydraulic components working reliably.
Vipeak provide the high quality hydraulic cone crushers which offer several outstanding features such as excellent tramp release system, unique hydraulic lifting system, high crusher throw and reasonable cavity design, all of these features ensure the Symons type cone crusher
can offer the unbeatable performance in secondary, tertiary and quaternary applications.